LS S100 series AC Inverter for 4kW (5.4HP) 400V 3 Ph motor to 9A at high overload or 5.5kW (7.5HP) to 10A when Fan/Pump rated Operates in VxF or Sensorless Vector mode and converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC induction motor.
Features;
Features;
- Size C: 140mm Wide x 140mm Deep x 180mm High. IP20
- Weight: 2.23kg.
- Overload: 150% x 60 seconds, (High Overload)Overload: 120% x 60 seconds (Fan/Pump rated)
- Speed Control Range: 0-400Hz
- Braking: Minimum 130 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
- Built-in Safe Torque Off (STO)
- Integrated Keypad, 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Outputs, 1 Digital Output, 1 Relay Contact sets, DC Bus +/- Terminals.
- 'Safe Torque Off' (STO) function to SIL 2 (EN 61508) via Digital Input.
- Input Current: 9.8A (high overload).
- Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±5%
- EMC Compliance: IEC EN 61800-3 Category C3, (Class A) Industrial. Can Be disabled via connector switch if nescessary
- Rated 50°C Ambient (high overload), 40°C ambient (fan/pump rated).
- Ventilation space in front: [not specified].
- Ventilation space above and below: 100mm.
- Ventilation space at sides: 50mm.
- Ventilation space between: 2mm
- Heat Loss at max output: [not specified]
- Mounting via 4 x 4mm diameter holes at rear on 132mm x 170mm centres.
- Manufacturer part number is LV0040S100-4EOFNS, LSLV0040S100-4EOFNS (LV0040S100-4E0FNS)
Inquiry - LS Inverter S100 Series
